Function:
☑Support original US version of NES system, support some NES compatible machines.
☑Support NES / FC games and FC drive games.
☑Supports automatic flipping of FC / NES drive games.
☑Support instant archive and reading
☑Support FC / NES game gold finger.
☑FC / NES game archive automatic backup to SD card (no special operation required) ***
☑The Mapper support can be increased through software upgrade (the system loads the new Mapper file from the SD card)
☑Support FAT / FAT16 / FAT32 format memory card.
☑Support 32GB SD memory card.
☑High-speed loading games (usually only 4 ~ 8 seconds to load each game)
☑Custom game cartridge label,
☑OS-V13 , The newest and best circuit
☑Don’t Support OS updates.
☑With save function, save progress, never lost
☑Comes with a 1000 Game TF card and a variety of games
☑Any question, just contact us.
Hardware introduction:
The main control uses the powerful Cyclone II FPGA chip
2 * 512Kbyte SRAM as PRG and CHR data carrier.
128kbyte game archive chip.
1Mb flash BIOS chip.
The matching level between the voltage transition buffer on the PPU and CPU bus is 5V NES bus and 3.3V EverDrive bus. Far less noise and power consumption than simple resistor buffering
-
-
Hello friends, this is a free 1000+ games directory listing. Note that if some games won’t open, it may be a game version issue. Please change the game. This is a normal phenomenon and does not belong to any quality problem. Please know.
-
Note:
1. Please use original console to play it. (Some of clone consoles couldn’t run it, some good quality clone console can run it. Sowe recommend the original game console)
2. Make sure your game console slot is clean. Or you will get a black screen.